 No Cooldown hack
Credits: tux-penguin
You Must have WPEpro to do this...
Start Archlord, log in, alt tab and start WPEpro.
now you have a WPEpro on your screen.
at the top go to VIEW then OPTIONS untick everything except send.
and check BUFFER - Packets max = 5000. apply.
now to TARGET PROGRAM. press the little arrow. select ALEFCLIENT.EXE.
now back to archlord. decide which skills you want to use.
Example skill button 3 = snow hazard (skill you will not use) and skill button 4 = Elemental stom (skill you want to have no cooldown)
now back to WPEpro. press start (THE BUTTON THAT LOOKS LIKE A PLAY BUTTON) back to archlord. fire skill 3 and skill 4, back to wpepro press the STOP button.
you now have your packets in the main box in WPEpro.
open NOTEPAD.
Look for your packets 64 and 40, there should be 2 of each, 64,40,64,40. the first set of 64 and 40 is from your skill 3 (the one you dont want to use) and the second set of 64, 40 is the for the skill you wish to have no cooldown.
NOTE: The 64 and 40 may or maynot be directly next to eachother, just take the first 64 then the first 40 after it, then the same for the second set.
now click on first set of 64, you will now have some code at the bottom.
count along the first line to 16. so you end up on the 16th set of double digits.Copy from ths 16th set to the 23rd set.
EXAMPLE
AA A1 A2 A3 A4 BB B1 B2 B3 B4 B5 B6 CC C1 C2 [C3 C4 C5 C6 DD D1 D2 D3] D4 D5 D6 D7 EE E1 E2 E3 E4 E5 E6
so you now have C3 C4 C5 C6 DD D1 D2 D3. put into notepad.
now find set 2 of your 64 packets and repete as above. and the same for your 40s.
So now in notepad you have something like this
C3 C4 C5 C6 DD D1 D2 D3(taken from 1st set of 64 packets, skill 3)
C3 C4 C5 C6 DD D1 D2 D3(taken from 2nd set of 64 packets, skill 4)
C3 C4 C5 C6 DD D1 D2 D3(taken from 1st set of 40 packets, skill 3)
C3 C4 C5 C6 DD D1 D2 D3(taken from 2nd set of 40 packets, skill 4)
Now on the left of WPEpro you will see filters. double click filter 1. this will bring up a new window. in it you will see SEARCH and MODIFY.
in search go to number 16. and now insert your set of digits from notpad.
16 17 18 19 20 21 22 23
-----------------------
search C3 C4 C5 C6 DD D1 D2 D3
and in modify put your next set in (the second set in notepad, from your second set of 64 packet)
untick all boxes except send. APPLY
now go to filter 2 and do the same but with the code you got from your 40 packets.
once applied. above the filters you will see a circle saying on. (next to a red X )
press this and you will see your silters go grey.
ok now to test your skills. go to Archlord, fire skill 3 and it should fire skill 4.
Now sometimes some things can happen.
1- skill 3 fires skill 4 but still has cooldown.
2- skill 3 fires skill 4 with no cooldown but does no damage.
if this happens dont worry,
go back to WPRpro, press the on button and you can now click on Filter 2.
now. what is in the 16-23 area in SEARCH must go in MODIFY and what was in MODIFY must go in SEARCH.
once done, apply and test again.
now you may have one of the probelms still. (for me usually skill has no cooldown but does no damage)
no panic, just go back and swap filter 2 again. so now you change back SEARCH to MODIFY and MODIFY to SEARCH.
Keep repeating this until the skill has no cooldown and does damage, sometimes it works after the first swap, sometimes you have to swap the modify and searches like 20 times, trust me its worth it in the end =)
I did not find this out, I am just reposting this in GzN because theres not much going on in this section, ENJOY!
There are many other things possible with packet editing, I'm just too lazy to figure them out xD
Last edited by Hornstar6969; 04-25-2008 at 10:09 PM.
| 
Linear Mode
