GunBound

[Slugsnack]

I've seen a lot of threads in the wrong section recently and from now on, I won't be just moving them. Posting in the wrong section will earn you a warning if not an infraction.

GunBound World Champion Bots/Hacks Download Come and download hacks for the new GunBound World Champion!. Downloads only! No asking for hacks allowed.

So unless you have a NEW release, I suggest you don't make a thread there. The downloads section is not for asking questions even if it is about hacks. Also, there is absolutely no point in reposting hacks in a new thread or pulling several hacks together into one thread to make it easier for other people to use.

If the hacks are around the forums already, then this will add to double-posting and spam.

====================================

I will add one more thing here. I've seen so many questions recently on how to operate an aimbot so these are the instructions here with permission from Sucrose.

••• HotKeys:

· PrtScr - Draws projectory line and calculates power needed to strike an opponent
· Page Up - Change Auto / Manual Modes
· Page Down - Change mobile
· Ctrl + F11 - Change to No-Ctrl style hotkeys. ('Ctrl' will not be needed when using Longshot, Backshot, Guide Others, and Change Width)
· (Ctrl) + Delete - Backshot Mode (On / Off)
· (Ctrl) + Insert - Longshot Mode (On / Off)
· (Ctrl) + W - Change width of projectory line for better visual (only works for Sugarbot)
· Ctrl + F12 - Exit aimbot (Doesn't apply to the No-Ctrl style.)

••• Step-by-Step Usage:

1. Enter into Gunbound with your aimbot and change your Interface option to Old by clicking on Options. Now enter a room. Choose Armor as your mobile, and start a game.
2. When you and your enemy are both on your screen (adjust the camera if not), put your mouse cursor on the enemy. Press the 'PrtScr' key located at the top right-hand corner of your keyboard near the F12 button. Do that each time that you want to get the aim. The aimbot will find you and the target on the screen and will draw a line at your current angle to the direction of the target and will draw a marker on the power bar of how much power is needed to strike the opponent.
3. Use Drag (or Slice) to put the currect power.
Note: You need to specify to the aimbot which mobile you would like to use. Press 'Page Down' until you find its name. (Armor is default)

That is all you need to know for an easy use.
The rest are advanced modes.

••• Auto / Manual Mode:

Auto Mode: Automatically finds the nearest enemy and will aim at them. Auto Mode will not always find a target, but it will in most cases. You can change to Manual Mode in that case. (Most people prefer Manual Mode) Press 'Page Up' to change from Auto Mode to Manual Mode.
Manual Mode: Will find the power and angle to hit the location of your mouse cursor. Place your mouse cursor on the enemy and press 'PrtScr'.

••• Backshot Mode:

If you shoot to the direction of the target, it's a NORMAL shot. If you shoot to the other direction and use the wind to take the shot to the correct direction to the target, it's a BACKSHOT. In this case, you should enable Backshot Mode.
Nak Underground:

If you are in a hole or near a wall and you shoot into the wall, use Backshot Mode and an angle lower then 70 to get the trajectory for an underground shot.

••• Longshot Mode:

With Longshot Mode you're able to hit an enemy outside of the screen. To be able to calculate the power needed to hit a target outside the screen, the aimbot program must know where you are and where the enemy is. Since they are not on the same screen, you need to take 2 'screen shots' and the program will combine them.
It may sound complicated, but after you master this, you will be able to do this in a very short time.
Step-by-Step Usage:

1. Press 'PrtScr' when you are on the screen (Find your position)
2. Enable Longshot Mode
3. Move the camera exactly 1 screen to the right or left, depending on your opponent's location
4. Press 'PrtScr' again (Find target's position)
5. Shoot
6. Disable Longshot Mode

When you move the camera (Step 3), make sure that it is exactly 1 screen away from the position of the first 'PrtScr' (Step 1). You can use landmarks and holes in the ground to measure.
Note: Make sure the camera stays on the same height. Don't move it up or down, move it only to the side.
In order to let the program know what side you are going to move the camera, target something on the side you are about to move to. For example, if you are aiming to the left side, then in the first 'PrtScr' (Step 1) you need to target something on the left side of you. If it is for the right side, then target something on the right side of you.
Tip: Use Manual Mode, it is much easier.


••• Angle 30 Boomer Hookshot:

While using the Boomer mobile, if the wind is blowing against you, it is possible to do a Hookshot and hit successfully.
Step-by-Step Usage:

1. Select Mobile '3. Nak / Boomer Hook (Angle 30 Only)'
2. Put your angle on 30 and aim towards the enemy
3. Shoot!
Note: At far distances, you may need to add a little bit to the power to hit successfully.

••• Trico's 3-Cabbage Lineup:

Using SS Indicators, it is easily possible to apply the 3-Cabbage Lineup attack on your enemies. Once perfected, you are able to do 600+ damage effectively (without Force, Lightning, Thor, etc.) Here I will explain the step-by-step usage of this feature.
Note: Shooting from the left to the right is easier than shooting from the right to the left, but I will do my best to explain.
Step-by-Step Usage:

Left-to-Right > > >

1. When using Trico, change weapon to Shot 2.
2. When you press 'PrtScr' with your cursor on the enemy, you will see a small green circle on the trajectory line that flows to your enemy. This is called the SS Indicator.
3. Try to line the SS Indicator up with the purple circle that is around your cursor using the Up and Down keys to modify your angle; it will not always be perfect but always use the closest angle.
4. Shoot!

< < < Right-to-Left

1. When using Trico, change weapon to Shot 2.
2. When you press 'PrtScr' with your cursor on the enemy, you will see a small green circle on the trajectory line that flows to your enemy. This is called the SS Indicator.
3. Instead of lining the SS Indicator up with the inside of the purple circle around your cursor like in the previous explanation, try to make the SS Indicator right above the purple circle about half an inch.
4. Shoot!
Note: For the longer airtime SS Indicator, line up the indicator with the purple circle and then go down to the nearest 10th of an angle. Example: If when lined up correctly your angle is 75 then press the Down key to lower your angle to 70.
Tip: Using Manual Mode throughout this tutorial is much easier.


••• Turtle's Timebomb Trick:

Turtle is known for it's mysterious SS maneuver and now it is your turn to learn how to do it. It's all about perfect timing so make sure you are a professional with whatever method you use to shoot (drag or slice.)
Step-by-Step Usage:

1. With Turtle as your selected mobile of choice, get your SS shot ready by changing your weapon to it.
2. When you press 'PrtScr' with your cursor on the enemy, you will see a small blue circle on the trajectory line that flows to your enemy. This is called the SS Indicator.
3. Try to line the SS Indicator up with the purple circle that is around your cursor using the Up and Down keys to modify your angle; it will not always be perfect but always use the closest angle.
4. Shoot!
Note: Most times when SS Indicator is placed below the purple circle around your cursor it will not open in time to do a massive damage.

It is important to use Old Interface as your aimbot will not work otherwise. These instructions will work for all Dragonbot based aimbots (the majority).


If there is something you feel I should add here as it is important everyone knows, feel free to PM me.

Thanks.