I am in no way responsible of anything happens to your iPhone/iPod Touch, such as bricking
Look At This Before Pwning Your iPhone/iPod Touch 
Credit For The Chart: Teslanaut Pwnage (Mac Only)
1. Download Pwnage Here:
http://ipp.iphwn.org/PwnageTool_1.0.zip
2. Download The 1.1.4 Firmware:
iPod Touch:
Here
iPhone:
Here
and save it somewhere
3. Restore your iPhone/iPod Touch normally (no restore mode or DFU mode) (Just click restore and update)(You have to be 1.1.4)
4. Put your iPhone/iPod Touch in DFU mode:
[HOW TO] Put iPhone/iPod Touch In DFU mode
1. Make sure your iPhone/iPod Touch is turned on and connected to iTunes
2. Hold the power and home button down at the same time till it turns off
3. As soon (like once you see) the iPhone/iPod Touch disappears (disconnects) from iTunes, let go of the power button but continue to hold the Home button
4. Wait till iTunes says "Your iPod is in recovery mode and has to be restored", if you look at your iPhone/iPod Touch the screen will be black...This is normal and your iPhone/iPod Touch is in DFU mode
If That Does Not Work, Do This:
1. Download iLiberty + For mac at
iPlus Pwns | Its soo hot, even we want it
2. Install and open it, at the top toolbar you will see advanced, click that then click DFU Mode
Back To Pwnage:
1. Now that you are in DFU Mode Restore Your iPhone/iPod Touch to 1.1.4 again
2. Close Everything you have opened, including this web-browser (Just remember this guide or write it on a piece of paper)
3. Open Pwnage Tool
4. Put your iPhone/iPod Touch in restore mode:
[HOW TO] Put iPhone/iPod Touch In Restore Mode:
1. Hold Power and Home button till it shuts off
2. Let go of both
3. Hold both of them down again till it turns on, when it does (You see the apple) Let go of the power button but continue to hold down the home button till you get the Connect To iTunes screen
If That Does Not Work, Try This:
1. Download iLiberty + For mac at
iPlus Pwns | Its soo hot, even we want it
2. Install and open it, at the top toolbar you will see advanced, click that then click Restore Mode
Back To Pwnage AGAIN:
1. You should have pwnage tool still open, hit Browse .ipsw
2. For iPod Touch Users Open: iPod1,1_1.1.4_4A102_Restore.ipsw file and click Open.
For iPhone Users Open: iPhone1,1_1.1.4_4A102_Restore.ipsw file and click Open.
IT HAS TO END IT .ipsw AND BE 1.1.4, IF IT IS NOT DONT CLICK IT!!! 
It Should Look Like This:
3. Make sure your iPhone/iPod Touch is in restore mode, plugged in and recognized by the computer (In iTunes i recommend un-checking the part that says "Open iTunes When This iPhone/iPod Touch Is Connected")
4. Click iPwner and let it do its thing
(DONT TOUCH ANYTHING WHILE IT DOES IT!!!) 
5. When its done it should boot up normally with a pineapple and you should see slide to unlock, if you get the Pwned Screen, thats ok too.
6. Now to create the Custom .ipsw, click IPSW Builder
7. Choose What You want, iPod Touch users only click: Use Custom Pictures, This also is a jailbreak.
Heres a definition of all of them:
Enable baseband update - Determines if the baseband update should be enabled in the custom ipsw. Only check this button if you wish to update the baseband modem portion of your iPhone. Warming! This may remove previous baseband unlocks or other modifications that have been previously made. If in doubt leave it unchecked.
Neuter bootloader - This will enable "Bootneutering" to the baseband firmware allowing custom firmware to be installed onto the iPhone baseband by convincing the iPhone that it is secure. Arbitrary secpacks and fls files will be accepted when the device is in this state. More info about bootneuter.
Under the BootNeuter checkbox will present two new options that are selectable these are -
Upgrade to 4.6 NB: Unless you understand this option you should avoid it.
Downgrade to 3.9 NB: Unless you understand this option you should avoid it.
Unlock baseband - This will enable the unlocking of the baseband to all networks using a custom "software unlock" process. This should be used if you plan to use a SIM card from a carrier other than the one provided by your original iPhone carrier.
Activate Phone - This will activate the phone so that it can be used with iTunes. This will bypass the Apple activation process and set the iPhone to be in an Activated state allowing access to the device's functions.
Use Custom Pictures - This option enables the use of custom iPhone graphics to replace the stock images that are used when the phone boots or goes into recovery mode.
8. Save it to the spot you want, if it asks for the bootloader files, follow this guide (iPhone Only):
How To Get Bootloader Files (iPhone Only) I am not directly linking it, you will have to do it this way
1. Go Here:
Breaking: Pwnage iPhone Unlocking and Hacking Tool Now Available, Works Great
2. Hit Command + F
3. Type bootloaders and hit find twice, you should next to a link that says [rapidshare.com] Click that
Alternative:
1. Go Here:
Breaking: Pwnage iPhone Unlocking and Hacking Tool Now Available, Works Great
2. Scroll down till you see a post that on the blue bar says:
Quote:
|
by dagamer34 at 04:45 PM on 04/03/08
|
and the post should say
R
Quote:
|
apidshare link for bootloaders: [rapidshare.com]
|
Click that
To open the .rar file:
In Windows, you need WinRAR
In Mac OS X, you need "The Unarchiver"
In there will be the 3.9 and 4.6 bootloader files, extract them somewhere
Back On Pwnage FINAL
9. If it asks for username and pass, go ahead and enter it
10. Open iTunes and put your iPhone/iPod Touch in restore mode again
11. Hold the option key and click restore, find the custom firmware and let it restore
ALL DONE
Bootneuter Guide:
sgold_bootrom:bootneuter [iPhone Dev Team]
Wifi Fix (iPhone Only):
news:wififix_announcement [iPhone Dev Team] Remember Rep Is Always Appriciated 
Linear Mode
