AgBot(Old Revbot) Releases & Support

ShAdOw_KiNg · #1 05-27-2008, 02:23 PM

Click Search this Thread and put in iMMoяTaL TeCHNiQuE To Check for
The Latest Version of Testosterone in This Thread
v v
* i will be putting it on ea update at the top of the post so its easy to search

CREDITS TO:FrankkkoJ

Please Read this before asking questions!

Important!: If you have any information that fits in this post, send it to me or post it in here and if it's usefull i'll add it.. credits to you!

Yes this bot has loop! It just came out! So it is still buggy! It's not recomended to use the latest (1.6.4) version when you have no premium! Loop is that it will buy pots, repair etc. and then goes back to hunting area

Code:

Update:
Credits To Rev6

Code:
Update v.1.6.5v5
- Fixed a bug where when looping and buying item, it buy item to infinity (for arrow on last release).
- NEW FEATURE: Stall network, you can now search for D9 Item in the stall network for chinese, european and alchemy//element!!!
- To use the STALL NETWORK feature, make sure to open the stall network before injecting the packet else you will get a DC.
Code:
Update v.1.6.5v3
DO NOT CLICK ON EXECUTE ERR.TXT (it not a godmode button can result in crash)
Increased attack skill (there was a logic error in skill casting before)
Fixed Bot attacking more then 1 monster simultaniously after it select a target.
Fixed Cycle skill error where uncheck it doesn't cast the first skill as the first one
Few bug for object recognition fixed.
Removed themida from nuconnector so no more problem with antivirus
Code:
Update v.1.6.5v2
We remove ALL item from the Selling TAB so bot by default will sell nothing, make sure not to put silk item in the selling tab
Fixed revive to town bug that didn't save
Fixed bot attacking more then 1 target and switching target too fast
Fixed IRC private message error
Loaded legend 3 /data/ folder
Enabled revive to town on death
Enabled revive on the spot for level 1-10
Received some successful result in the full loop.
There is still some bug we are aware of. Next release will be around May 25th
Code:
Update v.1.6.5
v1.6.5 work with legend 3
- MAKE SURE TO REMOVE ITEM FROM THE SELLING SECTION BEFORE USING THE WALKSCRIPT!!! SO IT DOESN'T SELL ITEM YOU DON'T WANT IT TO SELL LIKE SILK ITEM!, IF YOU PUT SILK ITEM IN THE SELL COLUMN, IT WILL SELL IT. CLICK ON CONFIGURE AND CLICK ON ITEM LIST! MAKE SURE NOT TO FORGET THIS STEP!
- Loaded legend 3 /data/ folder
- Enabled revive to town on death - Enabled revive on the spot for level 1-10 - Received some successful result in the full loop.
There is still some bug we are aware of. Next release will be around May 25th
Code:
Update v.1.6.4v3
Loaded legend 3 /data/ folder, (not tested with legend 3 yet)
Code:
Update v.1.6.4v2
Some issue with european buying.
Some issue with npc detection.
Received some successful result in the full loop.
There is still some bug we are aware of, this one is more stable then the one from last night.
Code:
Update v.1.6.4
If you want to upgrade to v1.6.4, the interaction with npc does work but haven't been fully tested. There is also some issue where you aren't able to interact with npc manually after using this feature, it will be corrected in newer version. If you do not have a premium, it would be recommended to upgrade but not to use the interaction with npc right away. There is also a newer version of nuconnector released, it is suppose to be more stable, let me know if your having any issue with it.
Code:
Update v.1.6.3v11
We released v11 of the bot
The full loop can't be programmed in the walkscript yet.
We are currently working on a newer version of the walkscript.

We are currently not reading email or really briefly depending on the title, if you have a problem, come and visit us on irc.
You can come and visit us on irc @ Rizon channel #agbot to report bug
Code:
Update v.1.6.3v10
"fixed problem with player sos,som,sosun not displaying msg."
Code:
Update v.1.6.3v7
Some skill not showing on login, we will keep updating those till friday, report the player.dat file by email.
An attemp to fix a few Europe buff in this release.
Modified the attack skill timers
Removed vbeclipse to add compatibility to windows xp 64 bits and vista 64 bits and a few others OS incompatibility.
Please report any trouble or inconvenient about this update as soon as possible.
Code:
Update v.1.6.3v6
fixed the unknown item error getting pickup to infinite
Code:
Update v.1.6.3v5
V1.6.3v5
buying from npc item where not recognized == fixed
when inventory full bot still pickup gold
bot not picking up some item like glove is fixed too
Code:
Update v.1.6.3v1 till v.1.6.3v4
* V1.6.3v4
** Fixed all the bug of v1-3
** Has the possibility to cast hp potion and mp potion for player and pet, better object recognition, quite a few bug fixed.
** Should recognize more monster around you.

* V1.6.3v3
** Bug with the Do not pickup any item

* V1.6.3v1&2
** They have bug related to bot picking up item on floor
Code:
Update v.1.6.2_2
New experimental release
This file has the possibility to cast hp potion and mp potion for player and pet, please note your inventory need to be listed identically as the one inside the game for this feature to work. After buying in town if inventory doesn't match, you can teleport or logoff and logon, your inventory will sync when you appear in town.
We will fix the sync problem most likely friday, fell free to test this experimental release.
Code:
Update v.1.6.2_1
Added "View Invisible Players option" This is off by default
Added "KS Player" This is off by default
Added "High HP monster first" This will make the bot hit the monster with the highest HP first that is attacking you. This is off by default
Code:
Update v.1.6.2
For people that don't use imbue skill, there was a bug each time they upgraded there skill which created a DC, this bug has been fixed in this version, if you aren't using an imbue skill with the bot, it would be good to considerate to upgrade as quickly as possible.
Code:
Update v.1.6.1
1-Newer item from last silkroad update has been added.
2-if not enough mana to cast a skill bot won't cast it.
3-Changed hotkey F5,F6,F7 you need to double press the hotkey in least then 1000msec for it to work (prevent a F5 for website refresh to start and stop the bot.
Code:
Update v.1.6
* The v1.6 enable bot to cast horse before the walkscript is executed and horse is killed at destination if he hasn't died on it way.
* Bolt and Arrow are counted together for return to town. If inventory full and return to town isn't checked, bot will stop to pickup item until there a free spot in inventory that open then the bot will continu to pick up item. config section has a few more feature.
* Missing feature due to lack of time: if you die, bot will turn off but you will stay dead on the ground. Sorry I will fix that feature later it was creating a DC when you die small bug on my side so I haven't activated the feature.
Code:
Update v.1.5.5
Least target invalid monster (not none, just least of them)
Also added Hotkey F5,F6,F7 to start/stop bot, show/hide Bot, Show/Hide silkroad (Hotkey should work with Vista if you rightclick agBot and runs as an Admin on Compability).
Code:
Update v.1.5.4.3 Fix
Without this FIX the bot doesn't pickup SoStar SoMoon or SoSun - So please replace your item.txt with this one NeDra were busy while making the last update so, sorry - it won't happen again.
Code:
Update v.1.5.4.3
Makes monster recognition better.
Code:
Update v.1.5.3
Fixed saving Huntingarea.

i made it so that bot pickup other player item on floor so if there a bot with monkey and monkey full, agbot will pickup the item.

the 25% potion that fill super fast are not calculated in the return to town as potion for hp and mp.

the seperator for the hunting area has been switched to ; and not - since - can be the negative sign ^^.

Separated the agBot Package from the Map's. So now the packages wont be gigantic everytime. Maps is a onetime download now. Lucky for Dialup Users ^^
Code:
Update v.1.5.2
fix for item and monster not being attacked
added "cmd","[clear hunting]",""
added "cmd","[add hunting]","xPos-yPos-radius" //where X,Y,R are integer
Code:
Update Fix Exe (1.51)

berserk can be casted on giant//party monster//3x mob attacking you etc..
Force to remove the "normal attack" skill so bot never use that skill.
Code:
Update 1.4v8 Includes:
In config folder there a file "WalkScript.txt"
That can be created

Go in Map Tab
Click Record Click
Use mouse to click on map where you want the bot to walk to record step.
Remove the check box to record

Open "WalkScript.txt" file and look at it.

When it done, click on Start script button and it will execute it.
You have a random value that is suppose to be working
by default it doesn't use the random.

I haven't tested with horse yet.
Code:
Update 1.5Stable Includes:
Added a button to show//hide silkroad in the config folder
Fixed attack skill casting speed

No it doesn't have a full loop
Next few small update will be to increase the amount of feature in the walkscript.txt
Eventually will be auto-cast hp pot for player & wolf
By increasing the amount of feature in walkscript... it mean to interact with npc eventually...

I called it stable because I felt like it,
but this is just another of my experimental release ^^

Little guide to make the bot work

First you will need the following files

Code:

OCX files
RapidShare: 1-Click Webhosting

Library Files
http://www.ascentive.com/support/new/libraryfiles.exe

No-DC Client
RapidShare: 1-Click Webhosting

agBot version 1.55 ( IMO ver 1.55 is the best release to date. )
RapidShare: 1-Click Webhosting

and maybe regvac
RapidShare: 1-Click Webhosting

Code:

***** Installation ******

1) Register the OCX files

copy VbEcplipse.ocx into C:WindowsSystem32

then click start > go to the "run" box, then type the following:

regsvr32 "C:Windowssystem32VbEclipse.ocx"

and press enter

Repeat the above for the 2 other ocx files ( comctl32.ocx and comdlg32.ocx)

ie. use regsvr32 "C:Windowssystem32comctl32.ocx"

then use regsvr32 "C:Windowssystem32comdlg32.ocx

2) Download the "library files" and install them

3) Having extracted ver 1.55 of agBot to any folder
Copy MediaPatcher.exe into C:Program FilesSilkroad and run it
(it will create 2 files port.bak and ip.bak)

4) replace sro_client.exe with the one from the 1.44 No-DC client

(make sure to rename the original sro_client first ie. rename it to sro_client.old or sro_client.144)

5) run "nuConnector Config.exe" and change the IP address from .26 to .27 (last octet)

6) now Run nuConnector.exe

7) Run agBot.exe

8) start silkroad

Most important. If you have been struggling to get agBot to work with a realease later than 1.55, I suggest you uninstall silkroad, then run a good registry cleaner (regvac) before re-installing and updating the client to 1.44, then follow the above steps.

Once installed use the guide site for help with configuration.

How to make the loop work:
Don't post: Can anyone make a guide?! It's on the official bot website! This will soon be translated to your own language! Please let the translaters do their job!

Howto fix invalid target:
I used to get ALOT of invalid targets while picking up items.. Bot stops for a long time and didn't pick up items that dropped like gold/alchemy items etc etc ..
So the solution is as following;
Raise process priority of agbot above normal (It wont hurt your other programs when you raise process priority of agbot) once you did that.. all invalid target and other problems like picking up stuff will be removed..
Atleast its working for me ..
agBot is working for me like Tbot or any other bot without any bugs etc xD
add thanks please if I helped and if its really helpfull add this to main page troubleshoots :P

Howto fix the closing nuConnector when starting sro:Open nuConnector Config.exe
Edit the ip from 121.128.133.26 to 121.128.133.27
Click on "Create Config File"
Click on "Ok"
Bot as always without closing Nuconnector

Howto Multiclient with Revbot & Loader v6:
* First you need a clean & up to date Version of Silkroad
* Then extract the Loader in it
* Copy the whole Silkroad Folder to a other Location and Rename it to any Name For example "Bot"
* Then extract the Revbot 1.4.7.2 Package in the Second Folder "Bot", und start Mediapatcher.

Now how to use it:
* Go back to clean Silkroad Folder & Start Loader.exe,
* Login your Stall char or the one you want to LVL
* Go to the Second Folder, called "Bot", start NuConnector.exe, than start agbot.exe and then Loader.exe,
* Login the char that will Bot
* now you have 2 chars logged in, hf

Skill Delay Fix //_ Only Old Versions!!!
To fix the skill delay go to your C:Program FilesSilkroaddata and open skill.txt

There you search for the skill that you are using. Like you're using elitepvpers-flame (example), go and search for elitepvpers-flame.

If u found it, then you need to change the numbers in the line as following;

After the first number which is the level of the the skill, change the next 5 numbers to 0.
Leave the next 6 numbers as they are and change the last number to 0. Do all your attack and imbue skills this way.

Example:

First you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,60000,15000,182,0,1,257,2,0,1

And after editing you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,0,0,182,0,1,257,2,0,0

Vista Problems (and sometimes WinXP):
Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:

You need to have the three files:Click

Put the three files in your system32 map (C:WindowsSystem32). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:WindowsSystem32VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:WindowsSystem32comctl32.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:WindowsSystem32comdlg32.ocx" without the "" and press enter for - finaly - the last time

MOST QUESTIONS ABOUT THIS: agBot DOESN'T SHOW UP!!! (Vista)
If you work with XP, try installing the library files. On the bottom of this thread you can find a link!!!
This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:Program FilesSilkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please . Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

Links:
Downloads:

Quote:

About Fixed EXE downloads!

If you are complete new to the bot and you want to bot with the new version, u have to download one of the old versions too. This is because most of the time the new bot versions just have a fixed EXE, like it says behind the bot name.

So if you want to download the newest bot - 1.5.2 atm - you have to download the old (1.4.7.2) to. The files in the 1.4 version, u put in ur sro folder and you run it normal, except for one thing.. place the fixed EXE in ur sro folder to. U start the bot with the new EXE instead of the old one and it'll work fine

agBot v1.6.5v5
Credits To Rev6

Rapidshare:Click
Megaupload:Click
Mediafire:Click
Virusscan: Click
MD5: cffe786f51d612ff940fd310e58cbf36

Maps:
Rapidshare:Click

Code:

Files
Credits To Rev6
Download Link for the LibraryFiles: Click
Download Link for the .ocx Files:Click 
Download Link for All-In-One: NOTE: bot version 1.7.4.2!!!Click

Code:

Links:
Webpage of Bot:Click
Wiki-page of Bot:click
Loader:Click

Guide for mc, how to install, how to use, etc.!
Guides

Youtube Link

Referrer:
the information came from here and i will keep getting t from here E*pvpers link to agbot i will try to keep this post up to date as soon as there is a release

hussert · #2 05-27-2008, 09:28 PM

Wow ..

Nice Thread , Indeed

...

Keep up the Good Work

ShAdOw_KiNg · #3 05-27-2008, 09:40 PM

thanks xD ill be trying to keep it updated to the latest version

texarkana1 · #4 05-28-2008, 02:21 PM

nice dude goin to check this out

ShAdOw_KiNg · #5 05-28-2008, 02:56 PM

ya its realy good i use it every day i can

Otakuyume · #6 06-04-2008, 03:57 PM

this is my new account...i will be keeping this thread up to date with this one so dont send any messages to shadow_king becuase i wont be logging into him anymore and no messages will come back from him

tofflen · #7 06-08-2008, 04:32 AM

i cant register the OCX files it sais "LoadLibrary("C:Windows/system32/VbEclipse.OCX") Failed"
it cant find it and i've puted it there

snhkicker · #8 07-23-2008, 09:19 AM

ns good things thanks

zero304 · #9 08-07-2008, 07:23 AM

nice but where is tha download?

xCloudz · #10 08-07-2008, 09:25 AM

Quote:

Originally Posted by zero304

nice but where is tha download?

I extracted all the download links from the first post. I not sure which you need to download though, I don't play Silkroad.

Quote:

Originally Posted by ShAdOw_KiNg

OCX files
RapidShare: 1-Click Webhosting

Library Files
http://www.ascentive.com/support/new/libraryfiles.exe

No-DC Client
RapidShare: 1-Click Webhosting

agBot version 1.55 ( IMO ver 1.55 is the best release to date. )
RapidShare: 1-Click Webhosting

and maybe regvac
RapidShare: 1-Click Webhosting

Downloads:

Rapidshare:Click
Megaupload:Click
Mediafire:Click

Maps:
Rapidshare:Click

Download Link for the LibraryFiles: Click
Download Link for the .ocx Files:Click
Download Link for All-In-One: NOTE: bot version 1.7.4.2!!!Click
Loader:Click

Guide for mc, how to install, how to use, etc.!
Guides